Skip to Main content Skip to Navigation
Reports

Modeling of the shared magnets of the ATF Extraction Line

Abstract : After extraction from the ATF Damping Ring, the linear beam optics is matched before injection into a section dedicated to beam diagnostics. Experimentally, vertical emittances in this section have since several years been observed to be larger than expected, byfactors of two to three, with a seemingly strong dependence on intensity. This has motivated studies of the possible sources of emittance growth. One of these is thought to be the non-linearity experienced by the beam during the extraction, as it is transported off-axis through several magnets which are shared with the Damping Ring. Such non-linearity can generate a sensitivity of the emittance to the orbit parameters in the extraction, which would be very undesirable in the newly built ATF2 final focus system, where the same extraction line is used. In this report, a detailed calculation of the modeling of these shared magnets is presented, in order to quantify the magnitudes of both the linear and non-linear fields to be used in the evaluation of the optics and in tracking simulations of the performance of the extraction line.
Complete list of metadatas

Cited literature [4 references]  Display  Hide  Download

http://hal.in2p3.fr/in2p3-00374444
Contributor : Sabine Starita <>
Submitted on : Wednesday, April 8, 2009 - 5:00:27 PM
Last modification on : Wednesday, September 16, 2020 - 4:23:19 PM
Long-term archiving on: : Thursday, June 10, 2010 - 8:05:48 PM

File

ELAN-Document-2008-013.pdf
Files produced by the author(s)

Identifiers

  • HAL Id : in2p3-00374444, version 1

Collections

IN2P3 | LAL | CNRS | LARA

Citation

M. Alabau Pons, A. Faus-Golfe, P. Bambade, G. Le Meur, F. Touze. Modeling of the shared magnets of the ATF Extraction Line. 2009, pp.1-26. ⟨in2p3-00374444⟩

Share

Metrics

Record views

189

Files downloads

96