HAL : in2p3-00649655, version 1

DOI : 10.1016/j.nima.2011.11.042

Fiche détaillée

Récupérer au format BibTeX - EndNote - TEI - RefWorks -

6th International Conference on New Developments in Photodetection (NDIP 2011), Lyon : France (2011)

Front-end multi-channel PMT-associated readout chip for hodoscope application

H. Mathez1, D. Dauvergne1, Y. Zoccarato1, Guo-Neng Lu2, Shiming Deng1

(2012)

The system development requires a dedicated multi-channel readout ASIC (Application Specific Integrated Circuit) to be associated with the MaPMTs. Each channel should have very low input impedance to avoid electrical crosstalk between adjacent channels and to minimize effects of detector and wiring capacitances (Cd + Cw). Crosstalk between channels may degrade position resolution, while these capacitances may degrade both frequency and noise performances. Each channel should also provide two separated outputs corresponding respectively to high-speed signal-event detection and low-noise signal-charge quantification at low counting rate. This paper presents a readout chip for this purpose. It has been designed in a 0.35µm SiGe BiCMOS process (AMS). This process allows the use of RF and large-transconductance bipolar components, which is useful for the design of wide-band, low-impedance and low-noise circuits with improved performances.

1 :	IPNL - Institut de Physique Nucléaire de Lyon
2 :	INL - Institut des Nanotechnologies de Lyon - Site de l'UCBL

équipe(s) de recherche : CAS-PHABIO électronique IPNL IN2P3/CNRS MICRHAU

Thème(s)

:

Sciences de l'ingénieur/Micro et nanotechnologies/Microélectronique

Mot(s)-clé(s) : current conveyor – charge sensitive amplifier – photomultiplier – ASIC

in2p3-00649655, version 1

http://hal.in2p3.fr/in2p3-00649655

oai:hal.in2p3.fr:in2p3-00649655

Contributeur : Edouard Bechetoille <>

Déposé pour le compte de : Shiming DENG <>

Soumis le : Jeudi 8 Décembre 2011, 13:49:01

Dernière modification le : Mercredi 24 Octobre 2012, 14:48:42