HAL : in2p3-00725852, version 1

Fiche détaillée

Récupérer au format BibTeX - EndNote - TEI - RefWorks -

Self-adjusting resistor unit in the detector-voltage supply of a charge-sensitive pre-amplifier for an ionization detector

K.-H. Schmidt1, B. Jurado1

(2012)

A self-adjusting resistor unit is described which stabilizes the bias voltage of a detector for ionising particles, while always keeping the parallel thermal noise of the bias resistor significantly below the detector shot noise. The user is exempted from adjusting the bias resistor to the detector leakage current for achieving optimum operation conditions. Moreover, the unit avoids the drop of the operation voltage on the detector when the reverse current increases up to several orders of magnitude without any further intervention. The self-adjusting unit leads to an extension of the time of operation of the detector under stable conditions by up to several orders of magnitude.

1 :	CENBG - Centre d'Etudes Nucléaires de Bordeaux Gradignan

équipe(s) de recherche : ACEN

Thème(s)

:

Sciences de l'ingénieur/Electronique

Mot(s)-clé(s) : Voltage stabilisation Charge-sensitive pre-amplifier Electronic noise Detection of ionizing particles

in2p3-00725852, version 1

http://hal.in2p3.fr/in2p3-00725852

oai:hal.in2p3.fr:in2p3-00725852

Contributeur : Nathalie Martin <>

Déposé pour le compte de : Béatriz JURADO <>

Soumis le : Mardi 28 Août 2012, 08:48:02

Dernière modification le : Mardi 28 Août 2012, 11:28:23